SUBEA 500 DIN balanced piston pack
Excellent anatomical mouthpiece developed with orthodontists.Ergonomic whiskers channel the flow of air bubbles out by the cheeks.
Exclusive anatomical mouthpiece developed with orthodontists. Dual density
Ergonomic whiskers and cover channel the flow of air bubbles
Balanced first stage regulator for greatly improved breathing comfort.
Chassis : 75.0% Polyamide 12 (PA12), 15.0% Brass, 5.0% Silicone, 5.0% Steel Yoke : 100.0% Brass Carry bag : 100.0% Polyester (PES)
All our regulators were also developed through usability or convenience testing (static, dynamic and biomechanical analysis) conducted by DAN Europe, as a specialist and independent consultant.
Our technical partner: Planet Ocean. This is a PADI 5 star diving centre based at Tribord. The centre uses Tribord equipment throughout the year. The team of instructors are rigorously involved in the development of Tribord diving products, from the design stage with product managers, designers and engineers, through prototype testing to long-term wear tests with the help of divers from beginner level to instructors in continuous training.
experienced divers. Balanced first stage regulator for greatly improved breathing comfort.
It is important to store diving equipment away from sources that produce ozone. Keep your equipment in a dry place away from heat and direct sunlight.
Restrictions on use
Diving requires the certification of an instructor.
FEATURES OF THE PRODUCT
Ergonomic whiskers channel the flow of air bubbles out by the cheeks.Breathing is easier thanks to the hydrodynamic openings in the cover.
SUBEA regulators: exclusive anatomical mouthpiece!
These regulators have been designed to be highly comfortable in the mouth thanks to their anatomical mouthpiece developed with orthodontists. The exclusive shape of this mouthpiece makes it easier to keep inside your mouth thanks to the bite wings, tongue support and the different thicknesses and densities of the material (mono and dual density) that take into account the jaw closure angle.
Second stage and easy breathing
A regulator second stage has to translate natural breathing behaviour into mechanical reality. A high quality second stage can significantly reduce stress and help improve diver safety by providing air more easily and in sufficient quantity, without the need for unnecessary effort. Breathing in is easier thanks to the hydrodynamic openings in the cover.
Breathing out: more visibility and less noise
When breathing out, ergonomic whiskers channel the flow of air bubbles to the cheeks so that the noise does not disturb the diver and so that the bubbles do not pass in front of the mask.
A balanced piston first stage for easy breathing. DIN version
The Subea 500 diving regulator first stage features a balanced piston that improves breathing at any depth. There are 2 high pressure (HP) outlets and 4 low pressure (LP) outlets. Balanced piston first stages are the preferred choice for sport divers and demanding professionals.DIN version.
TRIBORD unbalanced first stage regulators are certified for use in cold water (temperatures below +10°C). TRIBORD balanced first stage regulators are certified for use in temperate water (temperatures above +10°C). According to the EN 250: 2014 standard, cold water is considered to have a temperature below 10°C.
- Temperate water regulator: regulator for use in water temperatures greater than +10°C. - Cold water regulator: regulator for use in water temperatures less than +10 °C, and approved after a certification test at +4°C. When the temperature of the air or water is less than 10°C, diving is called "cold water diving".
When the temperature of the air or water is less than 5°C, diving is called "ice diving". Diving in icy water is extremely dangerous and requires specific training, equipment, preparation and special procedures. Use suitable thermal insulation depending on the temperature of the water in which you are diving and the activity you are doing.
The Subea diving octopus is a valve second stage, with a large diaphragm and a purge button.
Its simple and robust design provides long-lasting reliability and makes the SUBEA octopus the ideal second stage for new divers, as well as the perfect choice for safe diving thanks to its one-metre yellow hose for easy air sharing.
SUBEA pressure gauge: diving pressure gauge for tank pressures of up to 400 bars
Pressure gauge up to 400 bars that can be adapted to 200 and 300 bar technology. Compatible with high pressure systems.Red zone between 50 bar and 0 bar for added safety.Additional ring on the side for attaching a safety strap. Pressure gauge with stainless one-piece chrome-plated brass housing – Explosion proof, shock proof. Sensitive beryllium copper spiral element Hose with outside diameter of 55 mm. Male screw thread. 7/16'' HP.Backlit dial.
SAV: After-sales service
After a particularly intense season or after a long period of inactivity, TRIBORD recommends an inspection and a service annually or after 100 dives to maintain the guarantee.
* The prices listed on the site are the prices recommended by DECATHLON SA's central purchasing department.