SCD 100 4/3/2mm Neoprene Diving Hood

Ref :
8327951
Key feature
A 4/3/2mm diving hood to be worn with your wetsuit, to adapt your insulation to the diving environment
£11.99*

User benefits

Thermal insulation
4/3/2mm neoprene hood.
Easy dressing
100 % stretch neoprene. Designed to be easy and quick to put on.
Freedom of movement
Hood made with holes to allow air to escape underwater.
Visibility
The grey strip on the top of the head makes divers more visible.

TECHNICAL INFORMATION

Composition
Foam : 100.0% Rubber - Chloroprene (CR) - Neoprene Lining : 100.0% Polyamide (PA)
Approved by
Our technical partner: Planet Ocean (the PADI 5-star diving centre) based on the Water Sports Centre by Decathlon in Hendaye - France. The centre uses SUBEA diving equipment throughout the year. The team of instructors are rigorously involved in the development of our SUBEA products: from the design phase with the teams (product managers, designers and engineers), to the endurance tests with the help of the centre’s divers (from beginners to trainee instructors, all year long).
Tests
Designed and tested by our teams and our technical partner in Hendaye (France) to approve the thermal insulation.
made for
regular scuba divers in waters between 16°C and 24°C.
Warranty
2 years

ADVICES

Care instructions
Rinse in fresh water. Do not leave to dry in the sun.
Storage Tips
Dry your wetsuit out of the sun and well clear of all sources of heat. Store your wetsuit on a hanger to keep its shape and conserve the neoprene.
Restrictions on use
swimming

FEATURES OF THE PRODUCT

Adjust your warmth and the thickness of your suit!
When diving, cold is your worst enemy! Using the right thermal protection based on the water temperature, is essential. To avoid having to purchase different wetsuits for different diving conditions, we created the concept, with five pieces that can be combined with your wetsuit depending on the temperature. In this way, you can complete your thermal insulation with a hood, a neoprene top, a top with a hood, a 1mm under-shorty or a 5.5 mm over-shorty.
Tips on how to take care of your wetsuit
1) After each session, soak the wetsuit in clean water, on the outside and the inside 2) Use a bactericide solution to clean 3) Rinse thoroughly in clean water 4) Dry on a large hangar in a well ventilated place in the shade. Caution: the sun will cause the colours of the textile parts of the wetsuit to fade and speeds up the ageing process of the neoprene. Zip fasteners can be cleaned with a toothbrush and lubricated with silicone grease.
Air Expulse System
Small holes pierced on the top of the hood to allow trapped air to escape. A small inner flap however avoids water from entering through these holes.
HAUT DE PAGE