EASYBREATH® - Questions les plus fréquentes

EASYBREATH® - Frequently asked questions (FAQ)


1. What precautions should I take with my Easybreath®?

One thing to look out for: SAND.
- As for your sunglasses, avoid letting your Easybreath® come into contact with sand. Sand scratches the window of your mask.
- If sand is present, do not use force to clip the snorkel into place. Rinse the snorkel and mask before connecting them.
- Sand can also clog the float valve inside the snorkel. Rinse the snorkel vigorously or use a key that you can fit through the rear vents of the snorkel to unblock the float valve and rinse the snorkel to completely remove the sand.
In order to enjoy the benefits of your Easybreath® in the long term, wash it by hand with washing-up liquid after each week of use and store it in its ventilated mesh bag.


2. Why are there three sizes ?


The EASYBREATH® is currently available in 3 ADULT sizes which cover 90% of men's and women's faces throughout the world (European, Asian, etc.), and 1 Junior size :

- the extra-small size Junior size, for kids: X/S

- the small size adult mask, generally for women and teenagers: S/M

- the medium size adult mask : M/L

- the large size adult mask, generally for men: L/XL

3. What size Easybreath® should I choose?


The best thing is to try on both sizes in your nearest Decathlon store. Once the mask has been tightened to fit against your face, it is the right size if there is no gap between your chin and the silicone skirt of the mask.


size easybreath


If you cannot get to a store and you would rather order your EASYBREATH®  on the internet  (www.decathlon.co.uk), here is how to choose the right size at home:

With your mouth closed, measure the distance between the bridge of your nose and the bottom of your chin:

If it measures less than 10 cm (3,9"), choose size X/S

If it measures between 10 cm (3,9") and 12 cm (4 3/4"), choose size S/M

If it measures between  12 cm (4 3/4") and 13 cm (5,1"), choose size M/L

If it measures more than 13 cm (5,1"), choose size L/XL

When you receive your Easybreath, put it on to check that there is no gap between the bottom of the mask and your chin. (see video above)

4. My Easybreath® lets in water


There are several reasons why water may be getting into the mask:
- The most common is due to choosing the wrong size. The Easybreath® comes in three sizes for adults. S/M for slim faces (80% of women), M/L for medium face and L/XL for wider faces. Take a look at the section on how to choose the right size
- Warning gentlemen, your beard may be responsible for letting in water. Beards stop the seal between the silicone skirt of the mask and your skin from being properly established.
- For those with long hair, be careful not to trap any hair between your forehead and the mask.

5. The float valve in the snorkel is stuck, what should I do?


To enjoy using your Easybreath® for as long as possible, avoid putting it in the sand. If the float valve is stuck, it is most likely because sand has got between the float and the snorkel wall.

Use a key that you can fit through the rear vents of the snorkel to unblock the float valve and rinse the snorkel to completely remove the sand. You'll find a video guide at the bottom of the page.

6. Why is my breathing sometimes blocked?


If the air supply blocks it is because you have tilted your head too far forward or because a wave has passed over your head. The Easybreath® dry top stop water system is at work preventing water from getting inside. Your snorkel must have been totally submerged, therefore the float went up to plug the hole.
If you had leant your head too far forward with a traditional snorkel you would have been breathing in water.
All of our testers were surprised the first time too.

7.  How do I clip on the Easybreath® snorkel?


If you are having difficulty clipping the snorkel onto the mask, this is because there is sand where the two parts connect, near the seal or in the snorkel. This connection is precise to the nearest millimetre to ensure a perfect watertight seal between the snorkel and the mask.
If sand is present, do not use force to clip the snorkel into place. Rinse the snorkel and mask and make sure that there is no more sand left before trying to connect them again.

8. Why is there a slight buzzing sound when I breathe in?


To prevent fogging and to stop water from getting in, the Easybreath® has several valves. When you breathe in, some valves open whereas others close. This is why the sound of your breathing is slightly amplified. This is the same thing that happens when using a regulator when scuba diving.
Relax and breathe naturally through your nose to enjoy the wonders of the seabed.

9. Why do I take in water when I go underwater?


We developed the Dry top stop water concept primarily to prevent water from getting into the snorkel when there is choppy water, small waves on the surface or when the user leans their head too far forward. Under the same conditions with a traditional snorkel, the user could swallow the water that gets into the snorkel; this is what we wanted to avoid.
This Dry top stop water system only works when the snorkel and float valve are in a vertical position.
When free diving, the snorkel is in a horizontal position during the duck dive, this is when water can get into the snorkel.

10. Why can't you free dive with the Easybreath®?


The Easybreath® was designed for surface snorkelling, which represents 90% of the practice.
It is not possible to free dive for several reasons:
1) The dry top system does not work in a horizontal position when duck diving.
2) The volume of air contained in the Easybreath® is much greater than that contained in a traditional mask; from 1m deep, the pressure of the mask on the face becomes very uncomfortable.
3) When you free dive, you need to equalize the pressure afterwards, i.e. hold your nose and blow through it gently as if you are blowing your nose in order to balance the pressure of the ears so as not to pierce your eardrums. With the Easybreath® it is impossible to equalize because you cannot get at your nose.

11. Is having a beard a problem?


Yes. What makes a mask watertight is the contact between the smooth silicone skirt and your skin. As with a traditional mask, beards create tiny spaces that allow water to infiltrate.

12. Why is it fogging up?


The exclusive anti-fogging system through respiratory ventilation performs optimally in water ≥ 18°C.
It is essential to wash your Easybreath® by hand with washing-up liquid after each week of use. The window of your mask gets dirty due to salt water and the sun and eventually fogs up your mask.

13. What is the valve behind the white cover at the bottom of the mask for?


This valve lets you drain out any water that has got in without you having to remove the mask. If you have a little bit of water in your mask, raise your head and the water will automatically be let out by the valve.

14. Why won't the strap tighten?


If the strap won't tighten, this is because the strap has not gone through the small elasticated loop which lies along the strap. You'll find a video guide at the bottom of the page.

15. Why is the mask so big?


The first reason is that a large mask that covers the whole face is the only effective way to fulfil the Easybreath® promise: See 180° and breathe naturally underwater just like on dry land.
The second reason is that the Easybreath® complies with many standards including those concerning snorkels and respiratory effort. The dimensions of the snorkel and the white surround meet these regulations (EN 1972).

16. Why isn't the snorkel of the Easybreath® very long?


Contrary to what many people may think, the snorkel of the Easybreath® sticks out of the water more than a traditional snorkel. A traditional snorkel seems longer because it starts from the mouth and not the top of the head like the Easybreath®.
If you try breathing through a snorkel and then through a garden hose you will understand that the longer the tube, the harder it is to breathe.
To guarantee a level of respiratory effort that meets current standards, we cannot make the snorkel any longer.

17. When will the junior size be available?


The junior size is now available, (XS size)

18. Why can't you use the Easybreath® for swimming training?


Swimming requires a lot more effort than snorkelling, just as running requires a lot more effort than walking. Swimming training needs a significant amount of oxygen and your body will automatically switch to intensive mouth breathing. At this point, breathing with the Easybreath® would become very uncomfortable.

19. How long does the air supply in the Easybreath® last?


The Easybreath does not have an air supply. You do not breathe in the air in the volume of the mask, you breathe in air from the snorkel.

This FAQ section was created thanks to the feedback of Easybreath users. Please feel free to send me your comments or questions to enhance and share your experience.
Emily Gladwin
Product Manager
emily . gladwin (at) tribord.com

  • 1
  • 2
  • 3
  • 4
  • 5
How to choose the size of your EASYBREATH® mask

To make the most of your EASYBREATH®, it is essential to choose a size that is suited to the shape and size of your head. An EASYBREATH® which is too small will not provide an optimal level of comfort; an EASYBREATH® which is too big could result in water getting into the mask.

top10 photos instagram easybreath

Rated 4.3/5 on more than 156 customers reviews, the Easybreath snorkeling mask seems to perfectly satisfy its users.
Moreover, you are so many to share your experiences Easybreath on instagram... Thank you!
So, we have made a selection of the 10 most beautiful photography posted, clearly the Easybrath is inspiring you...

4.70 / 5 115 ratings
    4.70 / 5 115 ratings