100 men's 2/2 mm neoprene surfing wetsuit
Full-length men's surfing wetsuit to also keep your arms and legs warm during water sports activities.
2 mm neoprene. Full-length legs and long sleeves. Water over 17°C.
Back zip, making it easier to put on.
Freedom of movement
Shaped to optimise arm rotation while paddling.
Synthetic polyamide lining
Neoprene lined on both sides with a textile reinforcement.
Full wetsuit / Steamer
Water between 17°C and 22°C
1st technical price
Stretch flat seam
Foam : 90.0% Rubber - Chloroprene (CR) - Neoprene, 10.0% Polyamide (PA)
Developed and tested by our design teams in Hendaye, France. The components used for this product are laboratory tested to ensure the best possible quality and durability.
male surfers seeking warmth and a low price for use in water over 17°C.
Rinse in clean water, do not machine wash, do not leave in direct sunlight as sunlight speeds up the ageing process of neoprene.
In a dry, ventilated place. Avoid heat sources. To extend the life of your wetsuit, do not leave it out to dry in direct sunlight. Machine washing is not recommended.
FEATURES OF THE PRODUCT
This Tribord 100 2/2 wetsuit is made with genuine neoprene to ensure even better thermal insulation. The neoprene is lined with polyester fabric for added resistance to wear. Neoprene thickness: 2 mm. Neoprene is a closed-cell polychloroprene elastomeric foam with trapped nitrogen bubbles that have insulating properties. We test and guarantee the thermal quality of our neoprene materials.
How does neoprene work?
By trapping a thin layer of water around the body, a neoprene wetsuit works in two ways: 1. The trapped water gradually warms up; 2. Heat transfer from the body decreases. The wetsuit and the thin covering of water form a layer of insulation.
The neck finish has been developed to limit irritation on even the most sensitive skin. However, we recommend that you wear a UV top under the wetsuit to reduce the risk of irritation.
Recommendations for use
Make sure the flap is always inside the wetsuit to limit the risk of irritation with the zip and the neck.
Our zips and fastenings are laboratory tested in order to ensure an optimal lifespan and good resistance to salt water.
We designed this product with seamless panels under the arms to limit irritation due to the repetitive paddling movements associated with surf sports.
Sizing and fit
A surfing wetsuit should be a very tight fit to ensure the best possible thermal efficiency. It is perfectly normal to have the impression it is too tight when trying it on in a fitting room or at home. This discomfort quickly disappears once the suit gets wet. We have put the zip at the back of the wetsuit for more comfort during surf sports (when lying down to paddle).
Multi-water sports wetsuits
Our wetsuits are designed to meet the needs of the most demanding surfers. Our design choices also make them compatible with other water sports such as kitesurfing, windsurfing, wakeboarding, water skiing, sea wading or SUP (stand up paddle boarding).
* The prices listed on the site are the prices recommended by DECATHLON SA's central purchasing department.