• SUBEA Men's 5.5 mm diving wetsuit
  • SUBEA Men's 5.5 mm diving wetsuit
  • SUBEA Men's 5.5 mm diving wetsuit
  • SUBEA Men's 5.5 mm diving wetsuit
  • SUBEA Men's 5.5 mm diving wetsuit
  • SUBEA Men's 5.5 mm diving wetsuit
  • SUBEA Men's 5.5 mm diving wetsuit
  • SUBEA Men's 5.5 mm diving wetsuit
  • SUBEA Men's 5.5 mm diving wetsuit
  • SUBEA Men's 5.5 mm diving wetsuit

SUBEA Men's 5.5 mm diving wetsuit

Ref :
8330584
Key feature
Above all easy to put on and take off.
Post a comment
£39.99*

User benefits

Thermal insulation
5.5 mm neoprene jacket.
Easy dressing
Specially designed for quick and easy dressing
Freedom of movement
With thinner neoprene on the limbs for ease of movement.
Abrasion resistance
Glued and blindstitched assembly.
Anatomic design
You can mix and match longjohn and jacket sizes.

TECHNICAL INFORMATION

Type
Jacket
Thickness
5.5 mm
Temperature
Between 16° and 24°C
Composition
100% neoprene foam, 100% polyamide lining.
Approuvé par
Our technical partner: Planet Ocean. This is a PADI 5 star diving centre based at Tribord. The centre uses Tribord equipment throughout the year. The team of instructors are rigorously involved in the development of Tribord diving products, from the design stage with product managers, designers and engineers, through prototype testing to long-term wear tests with the help of divers from beginner level to instructors in continuous training.
Test lab terrain
Designed and tested by our teams and our technical partner in Hendaye (France) to approve the thermal insulation.
made for
SCUBA DIVERS in temperate waters (16 to 24°C).
Garantie
2 years

ADVICES

Care instructions
salt water resistant. Rinse with fresh water only before prolonged storage. Do not leave to dry in the sun.
Storage Tips
protect from sunlight and humidity.
Restrictions on use
Designed to be worn with neoprene longjohns.

FEATURES OF THE PRODUCT

Different neoprene thicknesses
The best balance between thermal insulation and freedom of movement. The thickest neoprene (5.6 mm) is on the torso (most important part to protect because of the vital organs); the thinnest neoprene (5.2 mm) is on the limbs for better mobility. The thicknesses and locations have been determined following a scientific experiment led by Tribord (divers equipped with sensors over their entire body).
Stitch bonded assembly
Neoprene is bonded and then stitched to ensure maximum resistance (the needle does not go all the way through the neoprene, preventing leaks).
Seam ends
The bar stitch of a seam is the most sensitive part. The end of the thread is coated, then placed back into the neoprene to prevent the seam from coming undone.
HAUT DE PAGE