5mm one-piece and hood for water between 16 and 24°C.
Zip wrist cuffs and ankles, long front fastening
Freedom of movement
No underarm seams for easier arm movements.
Stitch bonded assembly. Ergonomic knee reinforcements.
8 to 14 years.
black and blue.
1.3 kg in size 10 years.
Foam : 100.0% Rubber - Chloroprene (CR) - Neoprene Lining : 100.0% Polyamide (PA)
our technical partner: Planet Océan, a PADI 5 star diving centre based at TRIBORD. The centre uses Tribord equipment throughout the year. The team of instructors are rigorously involved in the development of our diving products. From the design stage, with product managers, designers and engineers, through prototype testing to long-term wear tests, with the help of novice divers and training instructors.
Test lab terrain
Designed and tested by our teams and our technical partner in Hendaye (France) to approve the thermal insulation.
SCUBA divers aged between 8 and 14, in waters between 16° and 24°.
salt water resistant. Rinse with fresh water before prolonged storage. Do not leave to dry in the sun.
Store in a dry place away from direct sunlight.
FEATURES OF THE PRODUCT
Club special: easy to read sizes thanks to a print on the left sleeve. Neoprene thickness: Made entirely of 5mm neoprene Getting feet into the wetsuit can be a difficult step when getting dressed, especially for teenagers and pre-teens who have proportionally large feet compared to their bodies. The zip enables the diameter of the wetsuit to be temporarily increased during dressing, then reduced to lay flat against the skin to reduce water entry.
Wrist and ankle zips
Getting feet into the wetsuit can be a difficult step when getting dressed, especially for teenagers and pre-teens who have proportionally large feet compared to their bodies. The zip enables the diameter of the wetsuit to be temporarily increased during dressing, then reduced to lay flat against the skin to reduce water entry.
Stitch bonded assembly
Neoprene is bonded and then stitched to ensure maximum resistance (the needle does not go all the way through the neoprene, preventing leaks).
End of stitching
The bar stitch at a seam is the most sensitive part. The end of the thread is coated, then placed back into the neoprene to prevent the seam from coming undone.
Small holes pierced on the top of the hood to allow trapped air to escape. A small inner flap however avoids water from entering through these holes.
You may also be interested in these products
* The prices listed on the site are the prices recommended by DECATHLON SA's central purchasing department.