4/3 mm neoprene, seamless assembly, front zip for an improved seal
Freedom of movement
20% lighter ultrastretch Neoprene, front zip.
Supratex knee pads. Reinforced taped assembly. Powerseam seals.
Impermeability / seal
Cuffs where the suit meets the skin. Trimless seams. Front zip closure.
Ultrastretch one-piece neoprene at the neck, easier to get over the shoulders.
Drainage holes at the bottom of the rear flap and in the key pocket.
Recycled polyester lining.
S / M / ML / L / LXL / XL
4 mm legs and chest, 3 mm arms
90% neoprene. 10% polyester. Non-petroleum based neoprene raw material.
Our technical partners: Nicolas Capdeville for bodyboarding competitions and Heremoana Luciani for surfing.
Test lab terrain
Designed and tested by our teams in Hendaye (France). Proper sizing is important in order to limit the amount of water trapped inside the wetsuit and thus provide good thermal insulation. It's normal to feel that the wetsuit is tight when trying it on, but once in the water this feeling disappears. A wetsuit that feels loose when tried on dry will not provide good thermal insulation.
INTENSIVE SURF SPORTS use in water over 12°C.
Rinse in clean water, do not machine wash, do not leave in direct sunlight as sunlight speeds up the ageing process of neoprene.
In a ventilated area away from sources of heat.
Restrictions on use
Not suitable for canyoning.
FEATURES OF THE PRODUCT
Cuffs where the suit meets the skin.
These keep water out, preventing capillary and geyser action during wind sports.
"Power seam" seamless method, interior tape and silicone outer seal to ensure elasticity and a watertight seal, water cannot seep through the seams. Seal cuffs where the suit meets the skin. toggle to adjust the closure of the zip flap. Key pocket
ML and LXL are the same width as the M or the L, but 10 cm longer (5 on the chest, 5 on the legs)
Adjustable elastics on front flap.
The cut of this wetsuit normally makes for a perfect fit thanks to numerous fittings and tests. However, for some body types, you may need to adjust the front strip using the 2 elastics provided.
on the right calf, with a cord and gusset flap.
Sheico N ultra-stretch neoprene foam, Xtend ultrastretch lamination. The components used are the most elastic on the market.
The combination of Neoprene and a seamless assembly preventing the entry of water makes this 4/3 mm a very warm wetsuit.
Without any rough edges to enable the best possible seal at the water inlets. However, water can seep in if you fall off or if you have chosen the wrong size.
The top of the wetsuit is assembled in a single piece from arm to arm for the best possible elasticity when putting it over your shoulders whilst retaining a tight seal when the wetsuit is done up. Large stainless steel zipper for easy grip.
Front zip fastening.
Symmetrical to allow shoulders to rotate symmetrically. Large stainless steel PK zip for easy zipping. Elastics for easy tightening to adjust seals.
Assembled by hand by our supplier partner SHEICO's Neoprene experts.
You may also be interested in these products
* The prices listed on the site are the prices recommended by DECATHLON SA's central purchasing department.