• 7 mm semi-dry diving suit with hood.
  • 7 mm semi-dry diving suit with hood.
  • 7 mm semi-dry diving suit with hood.
  • 7 mm semi-dry diving suit with hood.
  • 7 mm semi-dry diving suit with hood.
  • 7 mm semi-dry diving suit with hood.
  • 7 mm semi-dry diving suit with hood.
  • 7 mm semi-dry diving suit with hood.
  • 7 mm semi-dry diving suit with hood.
  • 7 mm semi-dry diving suit with hood.
  • 7 mm semi-dry diving suit with hood.
  • 7 mm semi-dry diving suit with hood.
  • 7 mm semi-dry diving suit with hood.
  • 7 mm semi-dry diving suit with hood.
  • 7 mm semi-dry diving suit with hood.
  • 7 mm semi-dry diving suit with hood.
  • 7 mm semi-dry diving suit with hood.
  • 7 mm semi-dry diving suit with hood.
  • 7 mm semi-dry diving suit with hood.
  • 7 mm semi-dry diving suit with hood.
  • 7 mm semi-dry diving suit with hood.
  • 7 mm semi-dry diving suit with hood.
  • 7 mm semi-dry diving suit with hood.
  • 7 mm semi-dry diving suit with hood.
  • 7 mm semi-dry diving suit with hood.
  • 7 mm semi-dry diving suit with hood.
  • 7 mm semi-dry diving suit with hood.

7 mm semi-dry diving suit with hood.

Ref :
8301093
Key feature
A semi-watertight wetsuit that keeps you nice and warm when diving in cold waters.
Post a comment
£189.99*

User benefits

Thermal insulation
7 mm neoprene semi-dry suit. T-ZIP concept watertight back zip.
Easy dressing
Suit with double cuffs and zips on arms and legs.
Freedom of movement
One-piece with separate hood. Pre-shaped cut.
Abrasion resistance
Ergonomic reinforcements at the knees (Supratex) and shoulders.

TECHNICAL INFORMATION

Composition
Foam : 100.0% Rubber - Chloroprene (CR) - Neoprene Lining : 100.0% Polyamide (PA)
Approuvé par
our technical partner: Planet Océan, a PADI 5 star diving centre based at TRIBORD. The centre uses Tribord equipment throughout the year. The team of instructors are rigorously involved in the development of our diving products. From the design stage, with product managers, designers and engineers, through prototype testing to long-term wear tests, with the help of novice divers and training instructors.
Test lab terrain
Designed and tested by our teams and our technical partner in Hendaye (France) to approve the thermal insulation.
made for
regular SCUBA divers in waters between 10° and 18°.
Garantie
2 years

ADVICES

Care instructions
Rinse regularly in clean water, do not machine wash, do not leave in direct sunlight as this speeds up the ageing process of neoprene. Regularly apply the non-greasy silicone lubricant supplied with the suit.
Storage Tips
Store hanging with the zip open in a ventilated area away from sources of heat.
Restrictions on use
ZIP: regularly apply non-greasy silicone lubricant.

FEATURES OF THE PRODUCT

PRODUCT VIDEO
<iframe width="510" height="287" src="//www.youtube.com/embed/PdD-pI0IBMc?rel=0" frameborder="0" allowfullscreen></iframe>
What is a semi-dry suit?
The semi-dry suit works on the same principle as a wetsuit, except that the T ZIP concept back zip is watertight. The cuffs prevent water from circulating. They are in fact clothes with low water circulation! The water is not renewed, which means there is less energy loss. Even if the body is wet, the main advantage of this wetsuit is that is keeps you warm when diving.
Thermal insulation
*The suit is made from 7 mm neoprene, covered on both sides with a polyamide fabric of varying thickness. *Thermospan on the chest and back. Sheico L foam. Nylon lining. Seals at the wrists and ankles with smooth double cuffs that can ALSO be folded over for added watertightness. *A high collar that is designed to be folded over with the smooth side against the skin for a seal at the neck. *T-ZIP concept watertight back zip.
Hood
*A separate 7 mm thick neoprene hood, with plush loop interior, that fits flat against the face with a preformed chin. *Air Expulse system: a system to evacuate air bubbles trapped in the hood. *It features a snap hook to attach it to the right thigh of the suit.
Getting the suit on and off
Double sleeves with zips on the arms and legs for maximum comfort while getting dressed. The elongated pull cord makes it easier to close the back zip.
Freedom of movement
One-piece with separate hood. Ultraspan side panels to adapt to fit different body shapes and suit various physiques. No underarm seams for easier arm movements. Pre-shaped cut.
Resistance to wear
Ergonomic reinforcements at the knees (Supratex) and shoulders, wrist protection to reduce the impact of friction. Interior reinforcements for enhanced resistance to use. Inseams covered with patches. Strength of nylon thread stitch bonded seams instead of polyester for better resistance to wear.
Thermal performance class
This scuba diving suit provides thermal protection that has been tested by the independent INPP institute in order to validate its compliance with the current standard (EN 14225-1: 2005). This suit is certified CLASS B A (+7°C/+12°C / +45°F/+54°F) B (+10°C/+18°C / +50°F/+64°F) C (+16°C/+24°C / +61°F/+75°F) D (+22°C/+30°C / +72°F/+86°F) DOWNLOAD the full user guide here <a href="http://www.tribord.com/user_guides/diving-neopren-class-b.pdf" target="_blank"></a>
How to use a semi-dry suit 1/2
Put a little lukewarm water (with the aid of a Thermos flask) into your semi-dry suit before diving. This will reduce the squeeze effect (under the effects of pressure during the descent, air trapped in the suit from when it was put on gets compressed and can crush the neoprene, creating folds and leading to pinching of the skin).
How to use a semi-dry suit 2/2
For diving in very cold water (e.g. in lakes and quarries), we recommend that you wear a diving vest under your semi-dry suit for added comfort.
HAUT DE PAGE